Exhibitors

Structure Properties： It is made of far infrared ceramic powder, non-woven cloth, heating bag. permanent magnet sheet, pressu re sensitive adhesive , and silicone oil paper. For The Treatment Of: ·Back pain caused by kidney deficiency. ·Chronic prostatitis Prostatic hyperplasia (hypertrophy). ·Frequent urination, dysuria, urgency, urinary net, sexual dysfunction and other sub-healthy population

Product features: 1. The jacket is transparent, easy to observe the liquid level and bubbles. 2. The 6:100 conical joint designed according to national standards can be used in combination with the products with standard 6:100 conjoint. 3. This product has good sealing property, without leakage. 4. Sterile, and pyrogen-free. 5. The scale ink has strong adhesion and does not fall off. 6. The anti-slip structure can prevent the core rod from slipping out of the jacket accidentally. Specifications model: The specifications of syringe are 1ml,2ml, 2.5ml, 3ml, 5ml, 10ml, 20ml,25ml, 30ml, 50ml, 0.3x13 mm, 0.36x13 mm,0.4x13mm, 0.45x15mm,0.5x20mm,0.55x25mm, 0.6x25mm, 0.6x32mm,0.7x32mm,0.8x30mm,0.9x30mm,1.1x38mm and1.2x38mm; the blade angle of the injection needle is the long inclined angle, which is expressed in LB; the wall type is thin-wall, expressed in Tw. Intended use: This product is suitable for liquid suction or injection. Related Department: General surgery department, emergency department, pediatrics department, gynecology department, infusion room , and other departments related to infusion

Specification model: U-40 (nominal capacity: 0.5ml and 1.0ml), U-100 (nominal capacity: 0.5ml and 1.0ml) needle diameter:0.3mm,0.33mm and 0.36mm Intended use: This product is suitable for injection of insulin solution into human body immediately after suction. Related Department: General surgery department, inpatient department and emergency department.

Specification Model: As for intake, this product is divided into Sy01 (intake type) and SY02 (non-intake type; intravenous Infusion Needle (mm)0.36 X15 RWLB, 0.45 x15TWLB, 0.55 X20 RWLB, 0.6 x25TWLB, 0.7x25 TWLB. 0.8x28 TWLB.0.9x28TWLB and 1.2x30 TWLB. Intended Use: This product is used for clinical intravenous infusion of drugs, only for infusion under gravity. Product Features: 1. Make infusion safer 2. Reduce the incidence of transfusion reaction 3. Reduce the incidence of phlebitis 4. Reduce the pain from the infusion Related Department: General surgery department, emergency department, pediatrics department, gynecology department, infusion room , and other departments related to infusion.

Product features: 1. Adopt a three-layer com-pound light shielding structure design. 2. Avoid the release of contaminated drugs by opaque agents. 3. Avoid contact between medical personnel and opaquing agent Specification model: The model/specification of the disposable lightproof infusion set is the fine-tuning precision filtration type of flow setting, which can be equipped with intravenous infusion needle and without intravenous infusion needle, lf with intravenous infusion needle, the specifications of the infusion needle are 0.45 x13.5RWLB,0.5 x17.5RWLB,0.55x17.5RWLB, 0.6x22.5TWLB, 0.7x22.5TWLB, 0.7x19TWLB,0,8X19TWLB,0,8x26TWLB,0,9x19TWLB,0.9x26TWLB,1.2x19TWLB, 1.2x26TWLB and12x38TWSB, Precision liauid filter aperture: 2um. 3um and 5um. Intended use: This product should be shielded from light from 290nm to 450nm and can be used for transfusion of levofloxacin, rifam pin, mecobalamin, sodium p-aminosalicylate, moxifloxacin and vitamin C, and for infusion under gravity only. This product is disposable and sterilized by ethylene oxide.

Product Features: Mild Formula, repairing the damaged skin inside Intended Use: For assisting in improving pathological scars on the skin and preventing the formation of pathological scars on the skin, suitable for healed wounds.

Specification： 300ml, 500ml Scope Application: This product is used for daily nasal health cleaning and care, occupational inhalation of dust workers nasal irrigation.

Structure Properties: Structure Properties: This proact comprises a heating bag, coated non-woven fabric, non-woven fabric containing pressure-sensitive adhesive, and silicone oil paper. Temperature: 40°C ~ 70°C.Holding viscosity < 2.5mm. Peel strength of pressure-sensitive adhesive tape > 1.0N/cm. Application Scope: This product is suitable for postpartum uterus warming.

Structure Properties: This product comprises a heating bag, coated non-woven fabric,non-woven fabric containing pressure-sensitive adhesive and silicone oil paper. Temperature:40 C~70 c. Heating up time ≤ 10mim. Peel strength≥ 10N/cm. Holding viscosity ≤ 2.5m. Application Scope: This product is suitable for adjuvant treatment of cervical spondylosis, scapulohumeral periarteritis, and lumbar disc herniation. muscle strain, rheumatoid arthritis , and soft tissue injury (non-acute).

Product Features: This product comprises woven backing, gel coat, polyethylene film coating, and so on. It should not contain any ingredients that have pharmacological, immunological or metabolic effects. Intended Use: This product is used for physical antipyretic and cold compressphysiotherapy. It is only for closed soft tissue.