Exhibitors

These are the sets used for the transfer of infusion fluids to the body through the pump. The spike side connects to the fluid source and the other side to the catheter. The tube in between is made of material compatible with the pump device. It can be produced in different designs according to the usage area. Transparent / amber / black tube is used according to the light sensitivity of the infusion liquid. If required, an IV bacteria filter or valve can be added to the set for drug applications.

Extension lines are used for the connection between the catheter and the pump device. Extension sets must have a pressure value suitable for the device pressure. (250 psi / 500 psi / 800 psi / 1200 psi) There are different lengths depending on the area of use. (An extension set is produced in all sizes between 10 cm and 300 cm.) Male or Female luer may be preferred depending on the type of connection points. (MF / MM / FF) Different colors of tubes are used according to the sensitivity of the infusion fluid. (Transparent / Orange / Black) In addition, in cases where the device or patient is mobile, extension sets in spiral form can be used.

It is used to separate particles and micro-organisms in infusion fluids. The filters used in the sets are produced with different pore sizes and test conditions (particle size, loading pressure, concentration, detection method) have the ability to hold 100% of microorganisms of a certain size. Filters in our product portfolio; 0.2 v e1.2 micron according to particle size, Baby / adult depending on the capacity, It has different options depending on the liquid used, transparent / protected from light. According to the usage of all filter types; It can be produced with extension line, stingless injection valve, injection port, 2 or 3 inputs.

These sets are used in medical imaging devices to transfer opaque fluid to the patient. It is produced in different designs depending on the purpose and criteria of the imaging device. To prevent liquids from escaping under pressure, one way or transfer valves are used. Valve interconnection set (25 and 35 cm) / Two inlet valve sets / Duplex interconnections In this group, mix sets used for preparation of medicines or nutritional fluids are also produced. (From 2 to 24 channels)

Chemotherapy drugs used in cancer treatment require maximum attention during application due to their toxic effects. The performance of preparation and application sets is very important for the health and safety of the patient and the user. In the preparation process, production is made with 2 or multi-channel mix sets and on the application side, with single, two or four input application options.