Exhibitors

ETO C 1445 Ethylene Oxide Sterilization Device; can sterilize all kinds of disposable and re-sterilisable medical instruments, lumen materials (without diameter and length limit), plastic, inorganic, electro-mechanical, temperature and humidity sensitive equipment and material with ethylene oxide gas at low temperature (37-55oC). The device sterilizes all kinds of heat-resistant or non-heat-resistant plastic, latex and made of metal, electro-mechanical, medical and surgical materials (absorbable and non-absorbable sutures, catheters, laparoscopic surgical instruments, implants, precision flexible medical products, endoscopes, rigid and semi-rigid lumen-shaped instruments) and disposable laboratory equipment, textile products, nonwoven materials, syringes etc. using ethylene oxide gas. Provides absolute safe sterilization on microorganisms, spores and insects. The most important advantage of the Industrial Ethylene Oxide sterilization method is that the packaged material can be completely sterilized with parcels and pallets. The product is stored for a long time on the shelf without losing its sterilization effect. The sterilizer consists of a complete chamber, and sterilization and air washing are carried out in the same chamber under vacuum. The products sterilized in the device are purified from ethylene oxide gas by air washing process automatically in the same chamber. Ethylene oxide gas expelled by the water neutralization system is dissolved and converted into ethyl glycol, degassed air is given to nature. The device automatically detects the pressure, gas, humidity, air washing values and completes the sterilization stages without any intervention. In the device, for sterilization of different products in different parameters, software and hardware infrastructure for different sterilization studies and multiple validation applications are made with SCADA. The ETO C 1445 reduces all possible costs to give you optimized economies of scale. Preconditioning, Sterilization with EO Gas and Aeration are done in the same chamber at Industrial ETO C 1445. This reduces the workload of employees, sterilization time and sterilization cost. (Nowadays in low-tech devices, users have to use separate devices for preconditioning and aeration of products.) (In Old Technologies with Bags and Bulbs, Under Pressure, the prolongation of the time, the workload and the need for large space increase the costs.) Teknomar is World s Largest ETO manufacturer with 62.5 m3 + 62,5 m3. - TEKNOMAR ETO - C 1445 Hospital Type Ethylene Oxide Gas Sterilizer ETO - C 1445 is a low temperature ETO Gas Sterilizer enables you to sterilize your medical, surgical, laboratory tools and equipments. Low Temperature process assists you to sterilize your humidity and heat sensitive products with EO Gas (C2H4O) Ethylene Oxide Gas has been used for a long time as the cost effective and well-known product sterilization technique. Medical equipments require high disinfection before applying the product. ETO-C 1445 provides high level sterilization with considering safety and low cost. All in one chamber is able you to apply preconditioning, gassing and aeration automatically by one touch without extra consumables and drying chamber needed. High technological compact design avoids you to use liner bag, conditioners and EO tubes for each cycle. Cost effective ETO-C 1445 provides you to place your items after packaging with ETO pouches and sterilize them in 6 hours including preconditioning, gassing and aeration.

HRF 3000 Automatic Detects Moist Load, Dries and Continues Sterilization Sterilization will never be interrupted HRF 3000 Hydrogen Peroxide Sterilization Device; All kinds of plastic, polymer, inorganic, electromechanical tools and surgical instruments, etc., which can be re-used, all kinds of heat and moisture sensitive medical materials that sterilize the new generation of ecological hydrogen peroxide plasma sterilization device. HRF 3000 (H2O2) Hydrogen Peroxide Plasma Sterilization Device is a low-temperature, non-moisture sterilizing device that does not cause toxic wastes. It is used in the sterilization of all kinds of medical materials and medical instruments such as metal and non-metal, inorganic, polymer, etc. - HRF 3000 HDROZONE Hydronium Heavy Molecule & Hydrogen Peroxide Plasma Sterilization Device Any type of medical tools, plastic, lumen products in any different length and diameter, electro mechanical products and surgical items, single and multiple channels, flexible endoscopes and similar complex long products can be safely sterilized. Long and complexed endoscope sterilization and fourth channeled/ 4,5 meter long multiple flexible lumen scopes can be sterilized. HRF 3000 hdrOzone sterilization device is manufactured for the first time by -TEKNOMAR LTD.- System is working between 37 C - 45 C, utilizing double sterilant as hydrogen peroxide (H2O2) and ozone (O3) along with plasma. The device uses 60% Hydrogen Peroxide (H2O2) solution and Medical Oxygen for safe and no-limit sterilization. In this way, thanks to the intelligent program design, Ozone and Hydrogen Peroxide are used together for the most effective sterilization at the lowest dose. Materials that are sterilized by Hydronium Heavy Molecule Plasma are offered ready to use without the need for extra ventilation. There is no harmful waste, only water vapor and oxygen. For this reason, as well as safe sterilization, it offers a safe use for personnel and the environment. The HRF 3000 hdrOzone sterilization device uses a fixed-programmed sterilization cycle, which eliminates user error in sterilization safety. There is no need to classify the materials to be sterilized and to choose the appropriate cycle and program as in old technology devices. Mixed loading can be done. The HRF 3000 hdrOzone sterilization device can be used as a standalone Hydrogen Peroxide Sterilization Plasma device besides its superior properties.

ASEPTICIZER high level particulate removal, bacterial filtration, microbiological protection and contamination reduction device. It provides 99.5% Particulate and 99.5% Biological Decontamination. General Specs: Controls the temperature, humidity and pressure in the area. It has 5 different modes including 3 positive, 1 negative and 1 automatic. It is capable of providing POSITIVE and NEGATIVE pressure and has a contamination system. Adjusts air speed flow according to filter efficiency with speed compensation system. The main filter is HEPA H14 (retention of 99.9998% for particles greater than 0.3 microns). Cleans the air from the external environment by using pre and waste filter application (Eu4, Eu9, H13, G4) The HEPA Plenium Box, which is suitable for DOP, ensures filter safety. The system has UVC 254 nm germicidal lamp. With UVION Module technology, it is provided to disinfect the filtered air with negative ion and atmospheric plasma effect. Values can be set via touch, color, graphic display and area variables can be observed. It has full automatic automation control and the sensor group is sensitive to sensitive changes. At maximum power, the measured volume is 55 Db Installation time is short, easy to use, and most importantly, it can be easily moved in any architectural changes inside the building, it can be mounted in another room. For different capacities and application areas, Wall, Ceiling, Corner modules are available. Unlike central systems, the application areas can be controlled independently. Thus, the risk of contamination is minimized by the use of Aseptizers. AREAS OF USAGE: Operating theaters, Intensive care areas (newborn, child, adult), Patient rooms, Nano technology laboratories, Production facilities (food, medicine, medical equipment), Units and areas of emergency services (isolation room, isolation room, decontamination / decontamination room-area, burn chamber) etc .. In all environments where high hygiene is required It is produced as an alternative to the central system. - Saharan Type Industrial Aseptizer Saharan Type Mobile Air Conditioning and Air Sterilization Device Saharan Aseptizer Provides A Maximum Level Of Air Sterilization In The Military And Civilian Saharan Field Uses. Saharan Aseptizer Provides Positive-Negative Air Pressure and Air- Conditioning of the Environment. Saharan Aseptizer is used in Field Type hospitals, Field Type uses and Tent hospitals. Saharan Aseptizer is a microbiological protection and contamination reduction, high-level particle cleaning and air conditioning device in airborne bacteria-virus sterilization. FIELDS OF USAGE Field Hospitals Tent Type Field Hospitals Mobile - Trailer Type Field Hospitals Container Type Field Hospitals Hospitals for Disaster Area Shed Type Hospitals etc. Saharan Aseptizer is used safely in all kinds of mobile and/or fixed field type hospitals and in all units of these hospitals where high hygiene and air-conditioning are needed, such as Isolation Room, Decontamination Room-Area, Burn Treatment Room, Emergency Unit, Operating Room Unit, Triage Unit, Laboratory Unit, Radiology Unit, Intensive Care Unit, Service Unit, Mobile Dialysis Unit, Blood Bank Unit etc. Saharan Aseptizer is specially produced for field type and mobile hospitals. Saharan Aseptizer can also be used as a stand-alone air conditioning device.

Uvion Atmospeheric Plasma Pathogen Ionizer It has a very high efficiency in air sterilization of homes and living areas. Bio decontamination rate is over 96%, it is recommended for use in the living areas of allergen patients, COPD patients, patients with low immune system, receiving chemotherapy and under threat of contamination. It is effective in low density virus interaction at 60 m2 depending on the condition of the area. It prevents the air spread of influenza and viral infections in the home environment, especially in the area where people are working. It has no side effects. There is no need to turn off the device when the person is present, as is the case with UV lamps. It performs high efficiency air sterilization in areas up to 40 m2 in areas such as hospitals, clinics, polyclinics, surgeries, pharmacies, intensive care, isolation rooms where the risk of contamination is very high. The biodecontamination rate is over 98%. Crowded areas with high risk of contamination, classrooms, offices, wards, lobbies, restaurants, dining halls and cafes, workshops, shopping malls, sports centers, etc. It provides very high efficiency air sterilization in areas up to 60 m2 in common living areas such as. It has a disinfectant effect through permanent ions. - XRETON-P Uvion Mobile Atmospeheric Plasma Pathogen Ionizer Device disinfects with ozone, ionizer, UV support and HEPA / ULPA filter. By producing negative ion and ozone (O3), the device destroys pathogens, viruses and bacteria; Homogeneous air filtration and sterilization. XRETON-P Uvion is a compact and faraday cage qualified designed sterilization device. By generating negative Ion and Ozone (O3), device vanishes based pathogens, viruses, fungies, molds and bacterizes in the located area. Device that efficiency tested by authorized Universities can be run 24 hours per day at populated fields. The main filter (Hepa / Ulpa) has the highest keeping capability as %99,9998 on particles bigger than 0.3 microns.

Topi A100 Mobile Disposable CLASSIC NPWT Vacuum Assisted Wound Care Treatment Device and Dressing Set Topi A200 Mobile Disposable Incision NPWT Vacuum Assisted Wound Care Treatment Device and Dressing Set TopiVac Clinic V4 Professional Type Hybrid Topical Wound Treatment Device - The first and unique device in the world with Topical Vacuum Ozone, Oxygen Therapy, Irrigation and Electrostimulation functions. TopiVac Medium V2 Professional Type Hybrid Topical Wound Treatment Device: with the application of Oxygen Therapy , Irrigation, Vacuum functions. TopiVac Digital Hand Vacuum Assisted (NPWT) Wound Closure Therapy Device www.topivac.com